UV Water Disinfection Treatment Filter
UV Water Disinfection Treatment Filter is a UVC LED over flow water sterilization module. The module relies on water flow to dissipate heat and has its own water flow switch to prevent burnout due to water cutoff.
External Dimensions | 28.8(L)x27.6(W)x60(H) (Sterilization Module) |
---|---|
Inlet & Outlet Water Connection | φ6.5 (2-pipe) |
Applicable Flow Rate | 0.6~3lpm |
Rated Voltage | Dc12v/24v |
Sterilization Rate | ≥99.99% (e. Coli Atacc25922) |
Protection Level | Ip67 |
Details about UV Water Disinfection Treatment Filter
* Optimize the residence time of the fluid in the sterilization chamber to improve the sterilization effect.
* Reduce water flow resistance to avoid excessive pressure drop causing a reduction in flow rate.
* Optimize the flow field so that the flow velocity distribution of the cross section matches the irradiance distribution.
UV Water Disinfection Treatment Filter is a UVC LED over flow water sterilization module. The module relies on water flow to dissipate heat and has its own water flow switch to prevent burnout due to water cutoff.
* Applicable Water Temperature: 4~40℃ 8.
* Applicable Water Pressure: ≤0.4mpa.
* Start Flow Rate: 0.6lpm (low Flow Rate Under The Water Flow Switch Stability Is Not Good, It Is Recommended That Low In 0.8lpm Flow Without The Installation Of Water Flow Switch)
* Water Material: 304 Stainless Steel + Food-grade Ppo + Quartz Glass + Food-grade Silicone.
Dynamic sterilization series (can be connected to the middle or end of the waterway):
Static antibacterial system (for structures with water tanks):
CE / UL / TUV / ROHS / FCC / MSDS / EPA / Gmicro Testing Certified.
CONTACT US
Get Catalogue & Quote
info@Darklessled.com
TEL
+8613929574789
Address
Guangzhou City, Guangdong Province.