Ultraviolet Disinfection And Sterilization Lamp UVC (No Ozone/with Ozone)

Product Specification

Multi-function high-efficiency sterilization lamp isa new designultraviolet sterilizing lamp with the functions of sterilization, disinfection, mites removal and formaldehyde removal, mainly forhome and public environment use. Ultraviolet kill microorganisms (bacteria, viruses, sporesand other pathogens) through radiation damage to microorganisms and destroy the function of nucleic acids, to achieve the purpose of disinfection.

      Matters attention:

1. This product is only for indoor use, to avoid moisture and vibration.
2. Do not cover when using the lamp.
3. People and animals are not allowed on site when using the lights,please do not look at the lamp with your eyes to avoid eyeand skin damage.
4. Long time to contact the ultraviolet can harm to the humanbody (animal)/ eyes,so the doors and windows need to be closed when sterilization is dosed, and people and animals need to leave.
5. After sterilization, please ventilate the space for 30-60 minutes before entering, if smell irritant smell need to extend the ventilationtime to enter again.
6. Please wipe the lamp with a clean towel to keep the sterilization effect.
7. Frequency of use: it is recommended to use it once or twice a week for about 30 minutes each time. 8.1n the case of remote control broken or lost, can be inserted twicein succession plug. The second time after the sterilization lamp will flash,delay 15 seconds light automatically on, work 30 minutes automatically off.
8. Note that the remote control is used in one-to-one pairing.lt is recommended to pull the plug after use and avoid switching on and off lights with the same products in the nearby area.
9. Buy of two or more sterilizing lamp, if one of the remote control is lost or damaged, other remote controls can be used as follows,long press the 60-minute timing button of the remote control (press it all the time), then insert the plug of the sterilizing lamp, after the light flashes for 3~5 seconds, the button can be released, indicating that the remote control and the light complete the automatic code program,and then press ON/OFF can be used normally.(Note: if one remote control is needed to control multiple lights, the disinfection lights should be separated from each other in different rooms.)
10. Press on on/off first when using, the light will flash to indicate that the light has been turned on; Then press the button to set the timingfat the same time the light flashes),then the sterilization lamp will automatically delay the start of work after 15 seconds, after reaching the set working time will automatically dose.(the sterilizing lamp has three timing: 15/30/60 minutes, and the time set by the product will not stack)