Blog Category: led strip lights

The important certifications for LED lights include the CE, FCC, UL, CSA, ENERGY STAR, and RoHS. Besides, there are other voluntary certifications like GS, ENEC, ETL, cULus. These certifications specify the safety, performance, and environmental standards. 

Nowadays, decorative LED strips lights are in demand, thanks to their myriad of uses. You can use them to embellish your home in a variety of ways. For example, you can affix them under cabinets, under a bed, and in similar places.

Are you bored with your existing LED strip light setup? Do you wish to change it without causing any damage to the wall paint?
There could be several reasons for you to remove an LED strip light from the wall. Regardless, there is a right way to do it.

Yes, LED overheat in numerous cases. Not a single factor contributes to this fact. For example, low-quality LEDs can cause excessive heat production, and in turn, overheating. Similar cases include voltage spikes in the circuit and 100 percent load on the power supply.

Here are 4 common choices available for you: Use the Traditional Wall Dimmers+ Dimmable Power Supply (TRIAC), Opt for Low-Voltage PWM DC Dimmers, Use RF Dimming Controllers, Use a Wi-Fi Controller.

LED strips can be reused. LED strips have an average lifespan of 50,000 hours and are more energy-efficient. They last 10 – 15 times longer than their counterparts by consuming less energy for the same luminosity.

Here we have compiled the 8 most crucial factors that you need to keep in check while choosing a LED strip light Power Supply.(Temperature and Weather, Voltage/Current, Wattage, Dimmable LED Power Supplies, Efficiency, Size, Class II or Class 2, Brand)

There could be a variety of causes for your LED strip not working. The reasons can range from voltage mismatch to insufficient power supply to a loose connection. In some cases, manufacturing flaws or mechanical damage could be the cause of the breakdown.

Yes. You can connect multiple LED strip lights. Every LED strip has marked lines in the form of small dots. To adjust the length of the LED strip lights, you can just simply cut the strip lights at these points and join them either by using a connector or solders. Simple process!

Poor and cheap circuitry is the prime cause of bad smell lingering from your LED strip after each use. The LEDs tend to heat up in the unventilated fixtures. This leads to the burning of delicate electrical chips inside the core of the LED strip.